Professional Tool Reviews for Pros
Most of us are guilty of using the wrong tool for the job—either out of necessity or laziness. Still, there’s something satisfying about using the right tool for the job. Often, using the right tool helps bring about the best possible result. When drilling, accessories matter—possibly even more than the tool you choose. Knowing the various types of wood drilling bits and how to use the right one can really increase both speed and quality.
Before we get to drill bit types, you should be familiar with the various treatments drill bit manufacturers use to increase bit life and reduce friction. Drill bits are made from steel, high-speed steel (HSS)—which is steel alloyed with tungsten and/or molybdenum, HSS with a cobalt alloy, HSS with titanium coating, HSS with black oxide coating, or carbide tipped.
Drill bits appropriate for wood drilling are steel, HSS, titanium coated, and black oxide coated. Those other bits work best for metals. We’ve written about black oxide coating and have reviewed the best drill bits as well as the best drill bits for metal.
Wood species are divided into the two general categories of softwoods and hardwoods, but there is also much hardness variation within those categories. The wood type makes a significant difference in bit choice. Drilling a soft pine will be much easier on a drill bit than drilling a hard hickory. You can drill softer wood with steel (although we’d recommend HSS for any job) but as the hardness increases, it must be matched by bit hardness. This means a titanium or black oxide coating is appropriate for hardwood.
The purpose of the hole affects bit choice. Will the hole accommodate an anchor to hold a picture, will it be used for wire or conduit, does the fastener that goes in it need to be countersunk?
This is the type of bit that probably comes to mind first when you hear “drill bit.” It’s the most common type of bit and used for general purposes around the jobsite and home. Softwood can get stuck in the flutes, so gently remove it with a brush or by blowing it off.
As we mentioned above, twist drill bits (or “twist bits”) can range in price from affordable black oxide coated bits to expensive carbide bits used in milling. When it comes to choosing a drill bit for your wood project, a nice set of high-speed steel (HSS) bits should do just fine.
This wood drilling bit’s distinguishing feature is in the name. The sharp point on a brad point bit helps position the bit for a precise hole. These bits don’t walk on you when you start a hole. This makes this the right wood drilling bit for when you need a truly accurate start.
Spade bits have a broad, flat area for boring larger diameter holes in wood. The spade bit has no flutes so you may have to back off the bit as you go when drilling deeper holes. While a traditional spade bit has a perfectly flat face, products like the Bosch Daredevil spade bit feature a self-feed tip and a slightly curved face.
You’ll immediately notice a threaded tip on auger bits. This type of wood drilling bit uses the tip to quickly pull the bit through the wood. Auger bits maintain a constant flute throughout the length of the bit. These bits challenge cordless drills because they “force” the drill to maintain speed throughout the hole due to the self-feed tip.
Often confused with a Forstner bit, self-feeding bits include a threaded tip like the auger bit. This pulls the bit through the wood. These bits are meant for holes that go all the way through the wood. This is exactly the right type of wood drilling bit when you want to make a lot of larger holes for rough-in. Typically, self-feed bits are used for boring larger holes.
Self-feed bits can be a tad more aggressive than other large-diameter wood bits. They can also use either one or two cutting heads in addition to the perimeter cutting teeth. Check out our review of the Milwaukee self-feed bits and the Diablo SPEEDemon self-feed bits.
Just as the name implies, these long, skinny “bell hanger” wood drilling bits are used for electricians pulling wires or performing similar installation work. In addition to their long length, installer bits often feature a hole near the front of the bit for use with pulling wire.
A related bit to the installer bit is the flex bit which just uses a flexible shaft to let you get into tight spaces as needed. These can exist in lengths up to 72-inches.
These bits perform double duty as they drill a pilot hole and countersink the hole at the same time. This ensures that the fastener head sits just below the surface of the wood.
These odd-looking bits bore through wood or create flat-bottomed holes if the hole doesn’t go all the way through the piece. Use them when setting up cabinet hinges or similar applications.
A hole saw uses a pilot twist bit to guide a large diameter rotary saw that removes a plug from the wood. This allows conduit or wires to pass through. You also use these bits when drilling out locksets for doors. You can find hole saws for both wood and metal.
By now we think it’s clear when and how to use the right wood drilling bit. Have anything to add from your experience? Sound off on Facebook, Twitter, and Instagram to let us know what you think!
A liberty-loving, sensible, God-fearing options trader by day...Adam Spafford is known for his quick wit, easygoing demeanor, and readiness to lend a hand when called upon.
So you have a piece of metal and it needs a few holes in it. No big deal you think. You grab your drill and a bit. Five minutes later when you have barely made a dent in the metal, you decide it is time to go to the hardware store for a new drill […]
Thirty years ago marked the first time I learned how to drill through concrete or masonry. I had to run microphone cables at my Dad’s church during college. The job required drilling a 1/2-inch hole through 12-inches of solid cast concrete. At the time, I only had my new Black & Decker 1/2-inch drill—a drill […]
If you work on a construction site long enough, chances are you are going to have to learn how to work safely around cranes. Cranes set rafters. They install HVAC units on roofs. Cranes even assemble steel beams. In our case, however, we use cranes to install very heavy sculptures. Consequently, crane safety and using […]
We first saw Milwaukee One-Key tool technology demonstrated in 2015. Since then, the Bluetooth-based system has continued to improve and mature. It offers several integrated technologies that take brushless tools to their logical conclusion. In particular, Milwaukee One-Key offers three things: Advanced tool control, jobsite reporting, and power tool inventory control (including a form of […]
A wood bit concept missing here is Irwin’s “Speedbor Max”, which they also refer to as being a “triflute” design. I don’t know whether anyone else makes a “triflute” bit. It seems like those three flutes prevent it from being called a “paddle bit”, as regular spade bits tend to be. Irwin claims those three flutes make it faster than regular spade bits, but I wonder whether having three flutes instead of one might also cause it to perform more like an auger bit by leaving a cleaner exit hole than other spade bits? Anyway, I hope you guys will… Read more »
As an Amazon Associate, we may earn income when you click on an Amazon link. Thanks for helping us do what we love.
See our Privacy Policy and Terms & Conditions.
Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.
There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman!
Copyright ©2008-2022 Pro Tool Reviews, LLC. All rights reserved.
Professional Tool Reviews for Pros
This website uses anonymous cookies to provide you with the best browsing experience.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. Feel free to read our full privacy policy.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
This website uses the following additional cookies:
Gleam.io - This lets us offer giveaways that collect anonymous user information such as the number of visitors to the site. No personal information is collected until or unless it is voluntarily submitted for purposes of manually entering a giveaway.
Please enable Strictly Necessary Cookies first so that we can save your preferences!