Gw Carbide - Tungsten Carbide HRC45/55 D3-16mm 5xd Solid Carbide Twist Drill

HRC45/55 D3-16mm 5xd Solid Carbide Twist Drill1. Raw micro grain material, high hardness and T.R.Sa, Co: 10%,Wc:90%b, TRS: >3600 N/mm2c, HRA: 91.8-92.4, HRC:45-50/55-60/65/68d, Grain size: 0.4-0.6μme, Helix angle: 30°-45 °   Diameter of cutting edge: 0.2-0.9mm; 1-20mm   Diameter of rod

Featured Products


HRC45/55 D3-16mm 5xd Solid Carbide Twist Drill


1. Raw micro grain material, high hardness and T.R.S

a, Co: 10%,Wc:90%
b, TRS: >3600 N/mm2
c, HRA: 91.8-92.4, HRC:45-50/55-60/65/68
d, Grain size: 0.4-0.6μm
e, Helix angle: 30°-45 °
   Diameter of cutting edge: 0.2-0.9mm; 1-20mm
   Diameter of rods: 6-25mm      
   Total Length: 62mm-200mm
   Cutting Form: Flat,Square,Ball nose, Ball, Corner Radius, Taper Flute, etc.
   
 
2.  Application and usage
 
Suitable to cut Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Stainless steel, Plastic, Arcylic, etc. 
 
3. Super coating
 
TiSiN  TiAlN  AlTiN  TiCN or Blue Nano Coating

ItemAlTiNTiAiNTiSiNnAcO
Hardness(HV)32002800360042(GPA)
Thickness(UM)2.5-32.5-333
Oxidation Temp( ° )90080010001200
Friction0.30.30.450.4
ColorBlackVioletCopperBlue
 
 Flute dia (d)Cutting length ( l )Shank dia (D)Overall length(L)
1.0×3×4D×50L1.03450
1.5×4×4D×50L1.54450
2.0×6×4D×50L2.06450
2.5×7×4D×50L2.57450
3.0×8×4D×50L3.08450
3.5×10×4D×50L3.510450
4.0×11×4D×50L411450
4.5×13×6D×50L4.513650
5.0×13×6D×50L5.013650
5.5×13×6D×50L5.513650
6.0×15×6D×50L6.015650
6.5×15×8D×60L6.515860
7.0×17×8D×60L7.017860
7.5×17×8D×60L7.517860
8.0×20×8D×60L8.020860
8.5×23×10D×75L8.5231075
9.0×23×10D×75L9.0231075
9.5×25×10D×75L9.5251075
10.0×25×12D×75L10.0251275
10.5×28×12D×75L10.5281275
11.0×28×12D×75L11.0281275
11.5×28×12D×75L11.5281275
12.0×30×12D×75L12.0301275
13.0×33×16D×100L13.03316100
14.0×35×16D×100L14.03516100
15.0×38×16D×100L15.03816100
16.0×40×16D×100L16.04016100
17.0×40×20D×100L17.04020100
18.0×40×20D×100L18.04020100
19.0×40×20D×100L19.04020100
20.0×40×20D×100L20.04020100
25.0×40×25D×100L25.04025100
Gw Carbide -Tungsten Carbide HRC45/55 D3-16mm 5xd Solid Carbide Twist Drill
Gw Carbide -Tungsten Carbide HRC45/55 D3-16mm 5xd Solid Carbide Twist Drill
Gw Carbide -Tungsten Carbide HRC45/55 D3-16mm 5xd Solid Carbide Twist Drill
Gw Carbide -Tungsten Carbide HRC45/55 D3-16mm 5xd Solid Carbide Twist DrillGw Carbide -Tungsten Carbide HRC45/55 D3-16mm 5xd Solid Carbide Twist DrillGw Carbide -Tungsten Carbide HRC45/55 D3-16mm 5xd Solid Carbide Twist Drill

Any of your inquiry, we are always welcome!
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours